|
Range of Input Types with Plug-in Sensor Cards |
|
A range of sensor cards is available which enable the Isodaq VF-series or Hawk XT logger to be used with a variety of sensor or signal types. The appropriate card is simply plugged into the channel connector and the Isodaq software used to select the required measurement data.
|
Card |
Application |
Sensor Type |
|
|
|
|
|
| C21 |
Rainfall recording, wind speed, meter reading or frequency input |
Tipping bucket raingauges, anemometer flow, electricity or gas meters with pulsed output |
| |
| C22 |
Water level |
Incremental shaft encoder |
| |
| C23 |
Voltage, wind direction |
Wind vane |
| |
| C24 |
Current loop |
4-20mA loop inputs |
| |
| C25 |
Fluid depth / level |
Pressure transmitter (mA), ultrasonic (24V) |
| |
| C26 |
Voltage, AC current |
DC current clamp |
| |
| C27 |
Temperature |
Thermistor probe |
| |
| C30 |
Fluid depth / level |
Pressure transducer (mV) |
| |
| C31 |
Turbidity |
4-20mA Input 12V power |
| |
| C32 |
Anemometer |
Frequency input | |
